TOP > Category > Board to Board > DFW Series
0.6mm pitch board to board floating connector DFW series
Technical data
DFW is a 0.6mm pitch board to board connector with variable stacking heights from 13mm to 25mm.
This connector offers the value of x-y float of +/-0.5mm and effective contact length of 2.0mm. This high speed connector is rated to 5Gbps.
The DFW series is available in pin counts of 20, 40, 60, 80, 100 and 120.
・Number of Contact:20 ~ 120 Contacts
・Stacking Height:13 ~ 25 mm
・Contact Pitch:0.6 mm
・Floating Mechanism
     Y Axis(Short Edge) :±0.5 mm
     X Axis(Long Edge) :±0.5 mm
・Effective Contact Length:2.0 mm
・Solid design to thicken the housing
・Stacking heights can be selected by changing receptacle connectors
・Applied DDK original floating mechanism
Rated Voltage 50V AC(r.m.s.)/DC
Rated Current 0.5A / Contact
Dielectric Withstanding Voltage 150V AC(r.m.s.)for 1minute
Insulation Resistance 100 MΩ min. at 250V DC
Operating temperature range -55℃~+ 85℃
Operating humidity range 85% Rh max.( However, there must not be dewy.)
Preservation temperature -55℃~+ 85℃
Preservation humidity 85% Rh max.
Copyright©DDK Ltd., All Rights Reserved.